Nylon Slider Sleeve Insert 60mm OD x 2'' ID

Nylon Sleeve Insert 60mm OD x 52mm ID used on fitness equipment and Benches etc where metal box section is required to slide inside another

Nylon Sleeve Outside Dimension: 2 3/16" OD (55mm approx)

Nylon Sleeve Inside Dimension: 2" ID (52mm approx)

Size Including Fixing Lugs: 2 3/8" OD (60mm approx)

Size Including Upper Top Lip: 2 3/8" OD (60mm approx)

The Nylon Sleeve is designed to fit into 60mm x 60mm square metal box section (SHS) that has a 2mm - 2.5mm wall thickness (12-14gauge). The Nylon Sleeve Inside Diameter is 52mm to allow 50mm x 50mm or 2'' metal box section to slide inside it. There are two lugs either side of the Nylon Sleeve that will locate into pre-drilled holes within the outer 60mm x 60mm Square Box Section (SHS) to help lock the Nylon Sleeve into place

Engineer Note: It is important that the SHS used does not have too much of a corner radius as the Insert is quite square

Inner Box Section Spec: 50mm x 50mm or 2'' box section can be chrome plated or painted to a maximum thickness of 51.5mm

Additional Info: For Finishing the 50mm x 50mm Sliding Box Section Edge please < Click here >

Quantity: (Each)

Availability: In Stock

Part Number: 10-0002

£4.90 ex VAT




Please be aware, if you are a customer within the EU or an International Country there may be extra customs fees such as VAT, Duty and Clearance charges of which you will be liable to pay.


Write an online review and share your thoughts with other shoppers!
Reviewer: Alex


Hello again, received these bushes today and fitted them. Had to make a slight adjustment to them as they were not originally for my machine but now fit perfectly and has fixed the problem. Really pleased with your product and your service which has been first class from start to finish. Thank you for your help.